|Audi Car Audio - Radio and Bose Amp Removal and Repair|
|Audi Car Stereo Removal|
Installing Aftermarket Speakers and Proper Hook-up
With aftermarket stereo installation?
|Erratic Volume Control
|Audi Bose Speaker Enclosure and Bose Amplifier Removal|
1.1) Loosen the three torx screws under the arm rest, (4mm Allen), they are not removed but loosened. They relieve pressure on a clamping mechanism.
|2.1) Remove the arm rest by pulling out and up from the bottom.
2.2) Slide the switch panel out of the armrest as you remove it.
|3.1) Disconnect all the switches and push the wires through the hole.|
|4.1) Remove the two screws at top of the door panel, one at each side.|
|5.1) Remove one screw concealed by the door latch handle.|
|6.1) Slide the door latch trim to the forward to loosen the
6.2) Disconnect the door lock switch and the handle linkage.
6.3) Remove the latch assembly.
|7.1) Remove one screw exposed from removing the latch assembly.|
|8.1) Pull bottom of panel forward to release clips and work
up the sides releasing clips.
8.2) When free, lift panel up clearing the manual door-lock pin and out to remove panel from door.
8.3) Remove four screws securing Bose enclosure. Watch for spacers fitted between the door frame and enclosure.
|See our Shipping page and BOSE AMPLIFIER Repair Rates.|
|Rear Speaker Removal Presently Not Available.|
Factory Car Stereo Repair, Inc.