Buick Regal Car Stereo Removal and Installation
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
   
Buick Regal Stereo Removal, Replacement and Installation

How to Remove and Install Factory Car Stereo

This car stereo has a CDM (Control Data Module) box

Buick Regal Stereo Removal, Replacement and Installation 1.1) Gently pull trim panel from dash releasing clips.
Buick Regal Stereo Removal, Replacement and Installation 2.1) Remove four screws securing control head unit from dash. (There are two different sizes).

*NOTE - Volume control is usually broken on this unit.

Buick Regal Stereo Removal, Replacement and Installation *NOTE - Car stereo head unit is not economically repairable..
 
   
Factory Wire Color Codes
See Diagrams Below
   
Aftermarket Wire Color Codes
See Diagrams Below
   

Speaker Phasing
Installing Aftermarket Speakers and Proper Hook-up

Speaker Phasing
Font Left   Front Right
+ Tan   + Light green
- Gray   - Dark green
     
Rear Left   Rear Right
+ Brown   + Dark blue
- Yellow   - Light blue
   
NO AUDIO
With aftermarket stereo installation?
   
Buick Regal - Wire Diagrams - Wire Color Codes
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
 
Wire Diagrams, Cadillac, Chevrolet, Corvette, Geo, GMC, Oldsmobile, Pontiac and Saturn.
DO NOT CUT FACTORY WIRE HARNESS
   
Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above.
We discourage cutting the factory wire harness.
This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.
Diagrams may not be applicable to Bose Audio Systems
   
GM Wire Harness Diagram, Wire Color Codes and Pin Configuration Wire color codes and wire diagrams
IMPORTANT - There are two (2) yellow*, two (2) gray and two (2) brown wires in this harness. Locate the +12 volt constant wire first. Label it or splice to constant wire on aftermarket stereo first. Swapping yellow wires will cause damage to any aftermarket stereo. Check fuses if your unable to find +12 volts.
1   Gray Left Front Speaker (-)
2   Tan Left Front Speaker (+)
3   Dark Green Right Front Speaker (-)
4   Light Green Right Front Speaker (+)
5   Black Ground
6   Brown Illumination
7   Gray Dimmer
8   Blank  
9   Yellow* (Green) Switched +12 volts
10   Orange Constant +12 volts
11   Light Blue Right Rear Speaker (-)
12   Dark Blue Right Rear Speaker (+)
13   Yellow Left Rear Speaker (-)
14   Brown Left Rear Speaker (+)
   
All wire diagrams and color codes are not 100% accurate.
   
Front and Rear Speaker Removal presently not available.
   

Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us

Factory Car Stereo Repair, Inc.
1987 Corporate Square, Suite 159
Longwood, Fl. 32750