Chevrolet Camaro Rear Bose Amplifier Removal
 
Common Bose amplifier problems, speakers snap, crackle or high pitch squeal.
See Car Stereo Repair.

Chevrolet Camaro '88-92 Rear Bose Amplifier Removal

1.1) Gently pull plastic trim from rear deck.
2.1) Two clips will release with pressure when panel is removed.
3.1) Repeat for opposite small plastic trim.
4.1) Remove all exposed screws.
5.1) Remove speaker grill cover.
6.1) Lift rear deck up, while still in car.
6.2) Release trigger on connector to disconnect.
7.1) Slide connector to side, the connector will release from panel.
8.1) Remove four screws securing speaker.
9.1) Lift speaker from deck.
10.1) Remove speaker and Bose amplifier.
11.1) Feed released connector through opening to remove.
   
Common Bose amplifier problems, speakers snap, crackle or high pitch squeal.
See Car Stereo Repair.
   
Speaker Phasing
Installing Aftermarket Speakers and Proper Hook-up
   
NO AUDIO
With aftermarket stereo installation?
   
Erratic Volume Control
DIY Repair
   
Car Stereo Removal
Audio Repair, Removal, Replacement and Installation 1) Remove four torx screws from the dash trim bezel and remove bezel.
2) Remove four screws securing factory car stereo.
3) Pull car stereo forward, disconnect antenna and connectors.
   

Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact US

Factory Car Stereo Repair, Inc.
1987 Corporate Square, Suite 159
Longwood, Fl. 32750