Infiniti Q45 CD and Control Panel Removal

Car Stereo Repair Home | Car Stereo Removal | FAQ | Shipping | Contact Us

   
Infiniti Q45 How to Remove Car Stereo Infiniti Q45 CD Changer Removal and Installation
1.1) Set Parking Brake and shift to low gear.
2.1) Pry back left side edge of center console insert releasing clips. All clips release with pry pressure.
3.1) Pry along left edge of center console panel releasing clips.
4.1) Pry back right side edge of center console insert releasing clips.
5.1) Pry along right edge of center console panel releasing clips.
6.1) Lift panel up from center console.
7.1) Pull connecting wire harnesses up from center console.
8.1) First connector, squeeze trigger into connector.
9.1) Remove connector.
10.1) Second connector, squeeze trigger into connector.
11.1) Remove connector.
12.1) Remove panel and set to side.
13.1) Remove one exposed screw left side of gear shift on side panel.
14.1) Remove one exposed screw right side of gear shift on side panel.
15.1) Pry left side of panel surrounding CD changer releasing clips.
16.1) Pry right side of panel surrounding CD changer releasing clips.
17.1) Remove panel and set to side.
18.1) Remove one screw bottom left of CD changer.
19.1) Remove one screw bottom right of CD changer.
20.1) Open pocket and grasp door.
21.1) Pull pocket assembly from dash.
22.1) Locate connector at back of pocket assembly.
22.2) Squeeze trigger into connector.
23.1) Remove connector.
24.1) Remove pocket assembly and set to side.
25.1) Move driver's seat forward.
26.1) Behind driver's seat, side of center console, pry edge plastic cover.
27.1) Remove cover and set to side.
28.1) Remove exposed screw.
29.1) Move passenger's seat forward.
30.1) Behind passenger's seat, side of center console, pry edge plastic cover.
31.1) Remove cover and set to side.
32.1) Remove exposed screw.
33.1) Grasp sides of center console.
34.1) Pull center console back to release clips at front of center console at dash.
35.1) Lift front edge of center console up.

36.1) Lift center console up to wedge between seats.

Note - be careful of center console front edge along ceiling of vehicle.

37.1) Remove one screw left side of CD changer.
38.1) Remove one screw right side of CD changer.
39.1) Remove one screw bottom left of CD changer.
40.1) Remove one screw bottom right of CD changer.
41.1) Grasp edge of CD changer.
42.1) Pull CD changer from dash.
43.1) Locate connector at back of CD changer.
44.1) Squeeze trigger into connector.
45.1) Remove connector.
46.1) Remove CD changer.
   
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
Infiniti Q45 Control Panel Removal
Infiniti Q45 Control Panel Removal
for Access to Display Module and Clock Assembly
Infiniti Q45 Car Stereo Repair, Ipod, XM, Sirius, Bluetooth and USB Interface 1.1) Pry edge of small insignia labeled panel from dash releasing clips. All clips release with pry pressure.
Infiniti Ipod, XM, Siriur, Blue Tooth, and USB Integration 2.1) Remove small panel and set to side.
Install USB, Ipod, XM, Sirius and Blue Tooth Adaptors 3.1) Remove exposed screw.
Infiniti Ipod, XM, Sirius, Blue Tooth and USB adaptor installtion 4.1) Pry edge of small security labeled panel from dash releasing clips.
Install Ipod, USB, XM, Sirius and Blue Tooth Integration 5.1) Panel is attached, pull slightly from opening.
Install USB, Ipod, Sirius, XM, Iphone Integration 6.1) Hold panel to side, remove exposed screw.
USB, Iphone, Ipod, XM, Siruis and Bluetooth Adaptor Install 7.1) Pry bottom left edge of entire panel from dash releasing clips.
Bluetooth, USB, XM, Sirius, Iphone and Ipod stereo integration adaptors 8.1) Pry along bottom of panel releasing clips.
Iphone, Ipod, USB, XM, Sirius and Bluetooth Integration to Car Stereo 9.1) Pry up along right side of panel releasing clips.
Iphone, Ipod, USB, Bluetooth and Sirius Hook Up to Car Stereo 10.1) Pry up along left side of panel releasing clips.
Iphone, Ipod, Bluetooth, USB and Sirius Intallation to Car Stereo 11.1) Release all clips and pull entire panel from dash.
Ipod, Iphone, USB, Bluetooth and Siruis Car Stereo Adaptor Installation 12.1) Locate connectors to panel.
USB, Ipod, Iphone, Bluetooth and Sirius Adaptor Integration Installation 13.1) Squeeze trigger on connector into connector to release lock.
USB, Ipod, Iphone, Bluetooth, Sirius Integration Adaptor Installation to Factory Car Stereo 14.1) Remove connector.
14.2) Repeat steps 12-14 for remaining connectors.
Bluetooth, USB, Ipod, Iphone and Siruis Adaptor Integration to Factory Car Stereo Installation 15.1) Remove panel and set to side.
Bluetooth, USB, Iphone, Ipod, Sirius Hook Up to Factory Car Stereo 16.1) Remove screws securing display module, release connectors to remove.
16.2) Clock is secured inside opening at bottom.
   

If you have found this page to be helpful, please
CLICK HERE!

   
   

Speaker Phasing
Installing Aftermarket Speakers and Proper Hook-up

   
NO AUDIO
With aftermarket stereo installation?
   
Erratic Volume Control
DIY Repair
   
Bose Speaker Removal and Replacement presently not available.
   

Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us

Factory Car Stereo Repair, Inc.
1987 Corporate Square, Suite 159
Longwood, Fl. 32750