Mazda B Series Truck Stereo and Speaker Remove and Install
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
Car Stereo Replacement, Installation and Removal

Mazda B-Series Pick-Up
How to Remove and Replace Factory Car Stereo

Car Stereo Replacement, Installation and Removal 1.1) Remove four screws securing gear shift trim and remove.
1.2) Remove four screws securing car stereo trim.
Car Stereo Replacement, Installation and Removal 2.1) Remove one 10mm bolt securing back of car stereo trim.
2.2) Remove housing with car stereo.
2.3) Disconnect all wires an antenna.
Car Stereo Replacement, Installation and Removal 3.1) Remove six screws securing stereo and bracket to housing.
 

Color Codes for Aftermarket Installation

Factory Wire Harness Codes
Below

   
Speaker Phasing
Installing Aftermarket Speakers and Proper Hook-up
   
NO AUDIO
With aftermarket stereo installation?
   
Erratic Volume Control
DIY Repair
   
Mazda Car Audio - Wire Diagrams - Wire Color Codes
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
 
DO NOT CUT FACTORY WIRE HARNESS
   
Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above.
We discourage cutting the factory wire harness.
This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.
   
Diagram 1
Car Stereo Repair - Wire Harness Codes - Bose Car Stereo, Speaker, Amplifier Repair
 
Diagram 2
WireharnessMazda022001.jpg (387810 bytes)
 
Diagram 3
WireharnessMazdaMillenia03180201.jpg (241067 bytes)
 
Wire diagrams may not be 100% accurate for your vehicle.

Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us

Factory Car Stereo Repair, Inc.
1987 Corporate Square, Suite 159
Longwood, Fl. 32750