Mazda MPV Van How to Removing and Installing Car Stereo
Car Stereo Repair
| Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
   
Mazda Stereo Replacement, Removal and Installation

Mazda MPV Van Car Stereo Removal and Replacement

Mazda Stereo Replacement, Removal and Installation 1.1) Remove ashtray, remove exposed screw.
1.2) Pull trim panel from dash releasing clips.
1.3) Disconnect lighter connector.
Mazda Stereo Replacement, Removal and Installation 2.1) Remove five screws securing Mazda car stereo to dash. Two at top, three at bottom.
2.2) Pull car stereo forward, disconnect antennas and connectors.
   

Color Codes for Aftermarket Installation

Factory Wire Harness Codes
Below

   
Speaker Phasing
Installing Aftermarket Speakers and Proper Hook-up
   
NO AUDIO
With aftermarket stereo installation?
   
Erratic Volume Control
DIY Repair
   
Mazda Car Audio - Wire Diagrams - Wire Color Codes
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
 
DO NOT CUT FACTORY WIRE HARNESS
   
Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above.
We discourage cutting the factory wire harness.
This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.
   
Diagram 1
Car Stereo Repair - Wire Harness Codes - Bose Car Stereo, Speaker, Amplifier Repair
 
Diagram 2
WireharnessMazda022001.jpg (387810 bytes)
 
Diagram 3
WireharnessMazdaMillenia03180201.jpg (241067 bytes)
 
Wire diagrams may not be 100% accurate for your vehicle.
   
Front and Rear Speaker Removal presently not available.
 

Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us

Factory Car Stereo Repair, Inc.
1987 Corporate Square, Suite 159
Longwood, Fl. 32750