Mazda Miata DIY Removing and Installing Car Radio
Car Stereo Repair
| Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
 
Mazda Miata How to Remove and Install Car Stereo
   
Aftermarket Audio Adaptor Installation after Removal
Mazda Miata Stereo Removal, Replacement and Installation

Auxiliary Audio Input Adaptor Install and Hook Up
Control Box  MAZ/PC-ALP
Wire Harness  ALP/M-RCA

Mazda Miata Stereo Removal, Replacement and Installation 1.1) Remove contents from both packages.
1.2) Install wired adaptor into control box.
Mazda Miata Stereo Removal, Replacement and Installation 2.1) Plug connector from control box into CD changer slot on back of car stereo.
Mazda Miata Stereo Removal, Replacement and Installation 3.1) Run end of wired adaptor to either side of center console.
3.2) Tuck control box back into car stereo cavity, allow room for car stereo installation.
   

Color Codes for Aftermarket Installation

Factory Wire Harness Codes
Below

   
Speaker Phasing
Installing Aftermarket Speakers and Proper Hook-up
   
NO AUDIO
With aftermarket stereo installation?
   
Erratic Volume Control
DIY Repair
   
Factory Car Stereo Repair -  How to Mazda Miata Door Panel Removal and Installation Instruction

Mazda Miata How to Remove and Install Front Door Panel

Factory Car Stereo Repair -  How to Mazda Miata Door Panel Removal and Installation Instruction 1.1) Pry center of panel pin away from door panel.
(This is similar to a wall anchor.)
Factory Car Stereo Repair -  How to Mazda Miata Door Panel Removal and Installation Instruction 2.1) Remove entire panel clip/pin from door panel.
Factory Car Stereo Repair -  How to Mazda Miata Door Panel Removal and Installation Instruction 3.1) Repeat above steps for two panel clips/pins along back edge of door panel.
Factory Car Stereo Repair -  How to Mazda Miata Door Panel Removal and Installation Instruction 4.1) Repeat above steps for two panel clips/pins along back edge of door panel.
Factory Car Stereo Repair -  How to Mazda Miata Door Panel Removal and Installation Instruction 5.1) Remove one screw from door handle.
Factory Car Stereo Repair -  How to Mazda Miata Door Panel Removal and Installation Instruction 6.1) Remove screw from door open pull cavity and remove panel.
Factory Car Stereo Repair -  How to Mazda Miata Door Panel Removal and Installation Instruction 7.1) Remove hidden screw under carpet cover in hand hold.
Factory Car Stereo Repair -  How to Mazda Miata Door Panel Removal and Installation Instruction 8.1) Pull door panel from door, up and out of window jam.
8.2) Disconnect connector at tweeter.
Factory Car Stereo Repair -  How to Mazda Miata Door Panel Removal and Installation Instruction 9.1) Four screws secure Bose subwoofer to door panel. Speaker can be purchased from dealership.
   
Mazda Car Audio - Wire Diagrams - Wire Color Codes
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
 
DO NOT CUT FACTORY WIRE HARNESS
   
Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above.
We discourage cutting the factory wire harness.
This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.
   
Diagram 1
Car Stereo Repair - Wire Harness Codes - Bose Car Stereo, Speaker, Amplifier Repair
 
Diagram 2
WireharnessMazda022001.jpg (387810 bytes)
 
Diagram 3
WireharnessMazdaMillenia03180201.jpg (241067 bytes)
 
Wire diagrams may not be 100% accurate for your vehicle.
   
Front and Rear Speaker Removal and Replacement presently not available.
   

Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us

Factory Car Stereo Repair, Inc.
1987 Corporate Square, Suite 159
Longwood, Fl. 32750