Mitsubishi Diamante Car Audio - Remove, Replace and Install
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
   
Diamante Factory Car Stereo Removal and Replacement
Mitsubishi Radio Removal, Replacement and Installation

Mitsubishi Diamante
Removing and Installing
Car Stereo

   
Mitsubishi Eclipse Factory Car Stereo, Removing, Installing and Repairing 1.1) Remove coin holders, this allows for easier removal of tray assembly with switch. Lift up and remove tray.
   
Eclipse CD Player Installation, Removal and Repair 2.1) Remove two screws at bottom of console exposed from removal of tray assembly.
   
Mitsubishi Car Radio Installation, Removing and Repairing 3.1) Remove two screws, one from each side of center console at front.
   
Mitsubishi Radio Removal, Install and Repair 4.1) Remove two screws, one from each side of center console at rear, (move front seats forward).

SET PARKING BRAKE

   
Mitsubishi Factory Car Stereo Repair, Install and Remove 5.1) Insert key, to "On" position, shift to lower gear.
5.2) Pull center console back from front of dash.
5.3) Remove two exposed screws.
5.4) Remove ash tray, this will allow for a hand hold. (*Some models have screw inside ash tray cavity.)
5.5) Pry trim panel from dash releasing remaining clips. (*Top of the trim panel above car stereo is tricky, be careful.)
   
Mitsubishi CD Radio Removal, Install and Repair 6.1) Remove four screws securing car stereo to dash.
6.2) Pull car stereo from dash, disconnect antennas and connectors.
Note: When reinstalling car stereo do not forget to install ground strap.
   

Aftermarket Car Stereo
Wire Harness

Factory Wire Harness Codes
Below

   

Factory Wire Harness, Color Codes and Aftermarket Installation

Factory Wire Harness Codes
Below

   
Speaker Phasing
Installing Aftermarket Speakers and Proper Hook-up
   
NO AUDIO
With aftermarket stereo installation?
   
Erratic Volume Control
DIY Repair
   
Removing and Replacing Speakers presently not available.
   
Factory Wire Harness Codes

Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us

   
DO NOT CUT FACTORY WIRE HARNESS
   
Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above.
We discourage cutting the factory wire harness.
This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.
   
Diagram 1
Car Stereo Repair - Wire Harness Codes - Bose Car Stereo, Speaker, Amplifier Repair
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
Diagram 2

Car Stereo Repair - Wire Harness Codes - Bose Car Stereo, Speaker, Amplifier Repair

1
2
3
4
5
6
7
8
9
ILL+
ACC
ILL-
BATT
RL+
RR+
FL+
FR+
N.C.

Car Stereo Repair - Wire Harness Codes - Bose Car Stereo, Speaker, Amplifier Repair

1
2
3
4
5
FL-
FR-
ANT B+
RL-
RR-
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
Diagram 3
Car Stereo Repair - Wire Harness Codes and Diagrams - Bose Car Stereo, Speaker, Amplifier Repair
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
Diagram 4
Car Stereo Repair - Wire Harness Codes and Diagrams - Bose Car Stereo, Speaker, Amplifier Repair
 
All wire diagrams are not 100% accurate.
   

Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us

Factory Car Stereo Repair, Inc.
1987 Corporate Square, Suite 159
Longwood, Fl. 32750