|Mitsubishi Outlander Car Stereo - Car Radio Removal|
|AC Control Cables
1.1) Under dash on driver's side of car along side of center
console are controls for your AC.
|2.1) Push securing metal clip apart to release cable.|
|3.1) Removed AC control cable. Lower cable is white.|
|4.1) Repeat process for upper AC cable. This cable is blue.|
|5.1) Both AC control cables released.|
|6.1) Gently pry lower edge of car stereo trim panel from dash.|
|7.1) Work your way up side of dash and repeat for right side of trim panel.|
|8.1) Pull car stereo trim panel forward from dash.|
|9.1) Reach behind panel, release
triggers on two connectors to disconnect.
9.2) Remove trim panel and AC control cables will follow.
|10.1) Remove four screws securing car stereo and mounting brackets to dash.|
|11.1) Pull car stereo from dash, remove antenna and release trigger on connector to disconnect.|
|Front and Rear Speaker Removal presently not available.|
Installing Aftermarket Speakers and Proper Hook-up
With aftermarket stereo installation?
|Erratic Volume Control
Factory Car Stereo Repair, Inc.