Mitsubishi Raider Car Audio - Car Radio Removal
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
 

Mitsubishi Raider
Factory Car Stereo Removal

   

Aftermarket Car Stereo
Wire Harness

Factory Wire Harness Codes
Below

   

Color Codes and Aftermarket Installation

Factory Wire Harness Codes
Below

   
Speaker Phasing
Installing Aftermarket Speakers and Proper Hook-up
   
NO AUDIO
With aftermarket stereo installation?
   
Erratic Volume Control
DIY Repair
   
How to Remove Mitsubishi Raider Front Door SpeakerInstruction Guide
   
How to Remove Speakers, Install and Replace

How to Remove Mitsubishi Raider Front Door Speaker

Installing Speakers, Removal and Replacement 1.1) At door handle cavity, gently pry leading edge of small cover.
How to Remove Speakers, Install and Replace 2.1) Swing cover to side for access.
Installing Speakers, Removal and Replacement 3.1) Remove exposed screw.
How to Remove Speakers, Install and Replace 4.1) Under handle on arm rest, remove one screw.
Installing Speakers, Removal and Replacement 5.1) Remove one screw bottom front edge of door panel.
How to Remove Speakers, Install and Replace 6.1) Remove one screw bottom back edge of door panel.
Installing Speakers, Removal and Replacement 7.1) Insert pry tool at back edge of control panel.
How to Remove Speakers, Install and Replace 8.1) Push pry tool in under panel to release clip.
Installing Speakers, Removal and Replacement 9.1) Grasp back edge of control panel.
How to Remove Speakers, Install and Replace 10.1) Pull control panel back to release front edge.
Installing Speakers, Removal and Replacement 11.1) Remove control panel from arm rest cavity.
How to Remove Speakers, Install and Replace 12.1) Squeeze trigger on first connector into connector to release and remove.
Installing Speakers, Removal and Replacement 13.1) Squeeze trigger on second connector into connector to release and remove.
How to Remove Speakers, Install and Replace 14.1) Squeeze trigger on third connector into connector to release and remove.
Installing Speakers, Removal and Replacement 15.1) Remove control panel and set to side.
How to Remove Speakers, Install and Replace 16.1) Pry top edge of triangular panel from door releasing clip. Clip releases with pry pressure.
Installing Speakers, Removal and Replacement 17.1) Pull edge of triangular panel away from door and hold.
How to Remove Speakers, Install and Replace 18.1) Grasp door handle and pull entire door panel up to release.
Installing Speakers, Removal and Replacement 19.1) Lift door panel up to release over door lock.
How to Remove Speakers, Install and Replace 20.1) Pull top edge of door panel back for access and locate door open handle linkage.
Installing Speakers, Removal and Replacement 21.1) Locate lock at end of linkage.
How to Remove Speakers, Install and Replace 22.1) Swing lock to side to release from linkage.
Installing Speakers, Removal and Replacement 23.1) Remove end of linkage from slot.
23.2) Remove door panel and set to side.
How to Remove Speakers, Install and Replace 24.1) Check door at triangular panel location for panel clip.
Installing Speakers, Removal and Replacement 25.1) Pry clip from door.
How to Remove Speakers, Install and Replace 26.1) Place clip into slot of door panel ready for reinstallation.

Note - When reinstalling door panel, hooks on back of door panel mate to slots on door. Guide door lock through door panel and push panel down to lock onto door.

Installing Speakers, Removal and Replacement 27.1) Remove screws securing speaker to door.

Note - for determining aftermarket installation polarity of speaker wires (+ & -) for correct hook up see Speaker Phasing above.

   
Mitsubishi Raider Rear Side Speaker Installation
Car Stereo Repair
| Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
Removing and Installing Speakers

How to Remove and Replace Rear Side Speaker

How to Remove Speakers, Install and Replcae 1.1) Grasp cover on seat belt restraint.
Removing and Installing Speakers 2.1) Pull cover to remove.
How to Remove Speakers, Install and Replcae 3.1) Remove 50T Torx securing screw.
Removing and Installing Speakers 4.1) Remove seat belt.
How to Remove Speakers, Install and Replcae 5.1) Lay seat belt to floor.
How to Remove Speakers, Install and Replcae 6.1) Grasp top edge of back panel across the back of vehicle.
6.2) Pull panel to release clips.
Removing and Installing Speakers 7.1) Continue across panel releasing all clips.
7.2) Panel will have to be bowed to remove from vehicle.
7.3) Pry all clips that remained along the back of the vehicle and place them into the slots on the back of the panel removed ready for reinstallation.
How to Remove Speakers, Install and Replcae 8.1) Grasp bottom edge of upper panel above panel with speaker grill, pull to release clips, pull panel down to release top of panel and remove.
Removing and Installing Speakers 9.1) When reinstalling side panel, rubber weather stripping needs to be pulled over edge of panel.
Removing and Installing Speakers 10.1) At door jam, pull up lower panel releasing clips.
How to Remove Speakers, Install and Replcae 11.1) Grasp top edge of lower side panel and pull to release clips.
Removing and Installing Speakers 12.1) Pull panel back from side of vehicle and lay on rear seat.
How to Remove Speakers, Install and Replcae 13.1) When reinstalling side panel, rubber weather stripping needs to be pulled over edge of panel.
Removing and Installing Speakers 14.1) Remove screws securing speaker to remove.
   
Factory Wire Harness Codes

Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us

   
DO NOT CUT FACTORY WIRE HARNESS
   
Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above.
We discourage cutting the factory wire harness.
This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.
   
Diagram 1
Car Stereo Repair - Wire Harness Codes - Bose Car Stereo, Speaker, Amplifier Repair
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
Diagram 2

Car Stereo Repair - Wire Harness Codes - Bose Car Stereo, Speaker, Amplifier Repair

1
2
3
4
5
6
7
8
9
ILL+
ACC
ILL-
BATT
RL+
RR+
FL+
FR+
N.C.

Car Stereo Repair - Wire Harness Codes - Bose Car Stereo, Speaker, Amplifier Repair

1
2
3
4
5
FL-
FR-
ANT B+
RL-
RR-
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
Diagram 3
Car Stereo Repair - Wire Harness Codes and Diagrams - Bose Car Stereo, Speaker, Amplifier Repair
Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us
Diagram 4
Car Stereo Repair - Wire Harness Codes and Diagrams - Bose Car Stereo, Speaker, Amplifier Repair
 
All wire diagrams are not 100% accurate.
   

Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us

Factory Car Stereo Repair, Inc.
1987 Corporate Square, Suite 159
Longwood, Fl. 32750