Toyota Celica Car Audio - Car Radio and Speaker Removal

Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact US

Toyota Radio Replacement, Removal and Repair.

Toyota Celica GTS Car Stereo Removal and Install Instructions

Replacing, Removing and Installing Car Stereo 1.1) Push seats to forward position, remove screws from both sides of center console from back seat.
1.2) Push seats to full back position.
Toyota Radio Replacement, Removal and Repair. 2.1) Open center console, remove two exposed screws at bottom.
Replacing, Removing and Installing Car Stereo 3.1) With seats in full back position, remove three screw along each side of center console.
Toyota Radio Replacement, Removal and Repair. 4.1) Remove ash tray.
4.2) Remove two exposed screws in ash tray cavity.
Replacing, Removing and Installing Car Stereo 5.1) Open glove box, remove one screw at top left corner.
Toyota Radio Replacement, Removal and Repair. 6.1) Close glove box.
6.2) Remove one 10mm bolt at bottom left corner of glove box.
Replacing, Removing and Installing Car Stereo 7.1) On drivers side, remove one screw at bottom of panel.
Toyota Radio Replacement, Removal and Repair. 8.1) On drivers side, remove one screw above coin holder.
Replacing, Removing and Installing Car Stereo 9.1) Insert fingers into coin holder, pull down on panel to expose hidden screw and remove.
Toyota Radio Replacement, Removal and Repair. 10.1) Set parking brake.
10.2) Shift gears toward back of car.
10.3)Release plastic insert from center console.
10.4) Lift front edge of center console and move center console toward back of car.
Replacing, Removing and Installing Car Stereo 11.1) Pull car stereo dash trim panel from dash.
11.2) Maneuver left side edge around panel, right side edge around glove box.
11.3) Disconnect lighter connector.
11.4) Remove car stereo trim panel.
Toyota Radio Replacement, Removal and Repair. 12.1) Remove four screws securing car stereo bracket and car stereo.
12.2) Pull car stereo forward, disconnect antennas and connectors.
   
Aftermarket Car Stereo Installation
   

Aftermarket Car Stereo
Wire Color Codes

Factory Wire Connector Codes
Below

   

Factory Wire Harness, Color Codes and Aftermarket Installation

Factory Wire Harness Codes
Below

   
Speaker Phasing
Installing Aftermarket Speakers and Proper Hook-up
   
NO AUDIO
With aftermarket stereo installation?
   
Erratic Volume Control
DIY Repair
   
Factory Wire Harness Codes

Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us

   
DO NOT CUT FACTORY WIRE HARNESS
   
Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above.
We discourage cutting the factory wire harness.
This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.
   
Diagram 1
Car Stereo Repair - Wire Harness Codes - Bose Car Stereo, Speaker, Amplifier Repair
 
Diagram 2
Car Stereo Repair - Wire Harness Codes - Bose Car Stereo, Speaker, Amplifier Repair
 
Diagram 3
Car Stereo Repair - Wire Harness Codes - Bose Car Stereo, Speaker, Amplifier Repair
 
Diagram 4
P500 - See Factory Connectors Video above.
Factory Car Stereo Repair, Bose Car Stereo, Bose Car Audio, Bose Car Speakers, Bose Amplifier Repair, Automotive Audio Repair
 
Diagram 5
CN701 - See Factory Connectors Video above.
Factory Car Stereo Repair, Bose Car Stereo, Bose Car Audio, Bose Car Speakers, Bose Amplifier Repair, Automotive Audio Repair
 

Car Stereo Repair | Car Stereo Removal | FAQ | Shipping for Repair | Contact Us

Factory Car Stereo Repair, Inc.
1987 Corporate Square, Suite 159
Longwood, Fl. 32750