|Celica - Replace, Remove and Install Radio and Speaker|
Factory Car Stereo Removal
|1.1) Pull trim from around gear shift up releasing four clips.
1.2) Remove two exposed screws.
|2.1) Pry down on upper lip of trim panel while pulling trim
panel from dash to release five clips. The top ones will be
difficult, be careful not to bend or crease trim panel.
2.2) Set trim panel to left side of console with wires.
|3.1) Remove four screws securing
car stereo to dash.
3.2) Remove antenna and connectors.
3.3) See our Shipping page before sending for repair.
|Aftermarket Car Stereo Installation|
|Aftermarket Car Stereo
Wire Color Codes
|Factory Wire Harness, Color Codes and Aftermarket Installation|
Installing Aftermarket Speakers and Proper Hook-up
With aftermarket stereo installation?
|Erratic Volume Control
Factory Car Stereo Repair, Inc.